---
title: "setTarget"
slug: "cli-vloadbalancer-targetgroup-settarget"
tags: ["Load Balancer", "VPC"]
updated: 2026-10-08T05:08:15Z
published: 2026-10-08T05:08:15Z
canonical: "cli.ncloud-docs.com/cli-vloadbalancer-targetgroup-settarget"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://cli.ncloud-docs.com/llms.txt
> Use this file to discover all available pages before exploring further.

# setTarget

Available in VPC

Set a target that will be applied to a target group. Regardless of the existing target list, only the newly specified target number list will be bound; if no target number list is specified, all previously bound target lists will be removed.

## Syntax

The `setTarget` syntax is as follows:

```
./ncloud vloadbalancer setTarget \
    --targetGroupNo <target-group-no> \
    [--targetNoList <target-no-list>] \
    [--regionCode <KR|SGN|JPN>] \
    [--output <json|xml>]
```

## Options

This section describes the options available when running `setTarget`.

### Required options

The following options are required for `setTarget`.

| Options | Type | Required | Description |
| --- | --- | --- | --- |
| `--targetGroupNo` | String | Required | Target group number - See [getTargetGroupList](/docs/en/cli-vloadbalancer-targetgroup-gettargetgrouplist). |

### Optional options

These are the optional options for `setTarget`. Options that are not specified will use their default values.

| Options | Type | Required | Description |
| --- | --- | --- | --- |
| `--targetNoList` | List | Optional | List of target numbers to bind - You can enter multiple items separated by spaces (e.g., `--targetNoList 34567890 34567891`). - If no list of target numbers is specified, all existing bound targets will be removed. - See [getServerInstanceList](/docs/en/cli-vserver-server-getserverinstancelist). |

### Common options

For information about the options common to all `vloadbalancer` subcommands, see [Load Balancer (VPC) options](/docs/en/cli-vloadbalancer#%EC%98%B5%EC%85%98).

## Examples

If the target configuration request is successful, the identification information and health check status of the targets bound to the target group are returned.

### Command

The command example is as follows:

```
./ncloud vloadbalancer setTarget \
    --targetGroupNo 55667788 \
    --targetNoList 34567890 \
    --regionCode KR \
    --output json
```

### Output

The output example is as follows:

```
{
  "setTargetResponse": {
    "totalRows": 1,
    "targetList": [
      {
        "targetNo": "34567890",
        "targetName": "lb-test-target-01",
        "targetIp": "10.0.1.6",
        "healthCheckStatus": {
          "code": "DOWN",
          "codeName": "Health DOWN state"
        },
        "healthCheckResponse": ""
      }
    ],
    "requestId": "d0e1f2a3-b4c5-6789-defa-012345678901",
    "returnCode": "0",
    "returnMessage": "success"
  }
}
```