---
title: "setNetworkAclDenyAllowGroupIpList"
slug: "cli-vpc-networkacl-setnetworkacldenyallowgroupiplist"
tags: ["VPC"]
updated: 2026-10-08T05:07:14Z
published: 2026-10-08T05:07:14Z
canonical: "cli.ncloud-docs.com/cli-vpc-networkacl-setnetworkacldenyallowgroupiplist"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://cli.ncloud-docs.com/llms.txt
> Use this file to discover all available pages before exploring further.

# setNetworkAclDenyAllowGroupIpList

Available in VPC

Set the IP list for a network ACL Deny-Allow group.

## Syntax

The `setNetworkAclDenyAllowGroupIpList` syntax is as follows:

```
./ncloud vpc setNetworkAclDenyAllowGroupIpList \
    --networkAclDenyAllowGroupNo <deny-allow-group-no> \
    [--ipList <ip-list>] \
    [--regionCode <KR|SGN|JPN>] \
    [--output <json|xml>]
```

## Options

This section describes the options available when running `setNetworkAclDenyAllowGroupIpList`.

### Required options

The following options are required for `setNetworkAclDenyAllowGroupIpList`.

| Options | Type | Required | Description |
| --- | --- | --- | --- |
| `--networkAclDenyAllowGroupNo` | String | Required | Network ACL deny-allow group number - See [getNetworkAclDenyAllowGroupList](/docs/en/cli-vpc-networkacl-getnetworkacldenyallowgrouplist). |

### Optional options

These are the optional options for `setNetworkAclDenyAllowGroupIpList`. Options that are not specified will use their default values.

| Options | Type | Required | Description |
| --- | --- | --- | --- |
| `--ipList` | List | Optional | IP address - You can enter multiple items separated by spaces (e.g., `--ipList 10.0.0.1 10.0.0.2`). - You can register up to 100 IP addresses; duplicate IP addresses are not allowed. - Within the same VPC, you can register up to 8 duplicate IP addresses. |

### Common options

For information about the options common to all `vpc` subcommands, see [VPC options](/docs/en/cli-vpc#%EC%98%B5%EC%85%98).

## Examples

If the request to configure the network ACL deny-allow group IP list is successful, the group's configuration information and IP list are returned.

### Command

The command example is as follows:

```
./ncloud vpc setNetworkAclDenyAllowGroupIpList \
    --networkAclDenyAllowGroupNo 78901234 \
    --ipList 192.0.2.10 192.0.2.11 \
    --regionCode KR \
    --output json
```

### Output

The output example is as follows:

```
{
  "setNetworkAclDenyAllowGroupIpListResponse": {
    "totalRows": 1,
    "networkAclDenyAllowGroupList": [
      {
        "networkAclDenyAllowGroupNo": "78901234",
        "networkAclDenyAllowGroupName": "test-dag-01",
        "networkAclDenyAllowGroupStatus": {
          "code": "SET",
          "codeName": "Configuring"
        },
        "vpcNo": "12345678",
        "ipList": [
          "192.0.2.10",
          "192.0.2.11"
        ],
        "networkAclDenyAllowGroupDescription": "Updated deny-allow group description",
        "createDate": "2026-07-07T14:41:47+0900",
        "isApplied": false
      }
    ],
    "requestId": "c5d6e7f8-a9b0-1234-cdef-567890123456",
    "returnCode": "0",
    "returnMessage": "success"
  }
}
```