---
title: "addRoute"
slug: "cli-vpc-routetable-addroute"
tags: ["VPC"]
updated: 2026-10-08T05:05:45Z
published: 2026-10-08T05:05:45Z
canonical: "cli.ncloud-docs.com/cli-vpc-routetable-addroute"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://cli.ncloud-docs.com/llms.txt
> Use this file to discover all available pages before exploring further.

# addRoute

Available in VPC

Add a route to a route table.

## Syntax

The `addRoute` syntax is as follows:

```
./ncloud vpc addRoute \
    --vpcNo <vpc-no> \
    --routeTableNo <route-table-no> \
    --routeList <route-list> \
    [--regionCode <KR|SGN|JPN>] \
    [--output <json|xml>]
```

## Options

This section describes the options available when running `addRoute`.

### Required options

The following options are required for `addRoute`.

| Options | Type | Required | Description |
| --- | --- | --- | --- |
| `--vpcNo` | String | Required | VPC number - See [getVpcList](/docs/en/cli-vpc-vpcmanagement-getvpclist). |
| `--routeTableNo` | String | Required | Route table number - See [getRouteTableList](/docs/en/cli-vpc-routetable-getroutetablelist). |
| `--routeList` | List | Required | Route list - For each route, enter {field='value'} pairs enclosed in quotes and separated by commas. - `destinationCidrBlock` (required): Destination IPv4 address range. Uses CIDR notation. Example: `0.0.0.0/0`, `100.10.20.0/24` - `targetTypeCode` (required): Destination type. `NATGW` (NAT Gateway) \| `VPCPEERING` (VPC peering) \| `VGW` (Virtual Private Gateway) - `targetNo` (required): Destination identification number. Check the list of resources corresponding to each destination type via the API. - `targetName` (required): Destination name. Check the list of resources corresponding to each destination type via the API. |

### Common options

For information about the options common to all `vpc` subcommands, see [VPC options](/docs/en/cli-vpc#%EC%98%B5%EC%85%98).

## Examples

If the route addition request is successful, the configuration information for each route is returned.

### Command

The command example is as follows:

```
./ncloud vpc addRoute \
    --vpcNo 12345678 \
    --routeTableNo 45678901 \
    --routeList "destinationCidrBlock='192.0.2.0/24', targetTypeCode='NATGW', targetNo='56789012', targetName='test-natgw'" \
    --regionCode KR \
    --output json
```

### Output

The output example is as follows:

```
{
  "addRouteResponse": {
    "totalRows": 3,
    "routeList": [
      {
        "destinationCidrBlock": "0.0.0.0/0",
        "targetName": "INTERNET GATEWAY",
        "routeTableNo": "45678901",
        "targetType": {
          "code": "IGW",
          "codeName": "Internet Gateway"
        },
        "targetNo": "",
        "isDefault": false
      },
      {
        "destinationCidrBlock": "10.0.0.0/16",
        "targetName": "LOCAL",
        "routeTableNo": "45678901",
        "targetType": {
          "code": "LOCAL",
          "codeName": "Local"
        },
        "targetNo": "",
        "isDefault": true
      },
      {
        "destinationCidrBlock": "192.0.2.0/24",
        "targetName": "test-natgw",
        "routeTableNo": "45678901",
        "targetType": {
          "code": "NATGW",
          "codeName": "NAT Gateway"
        },
        "targetNo": "56789012",
        "isDefault": false
      }
    ],
    "requestId": "f6a7b8c9-d0e1-2345-fabc-678901234567",
    "returnCode": "0",
    "returnMessage": "success"
  }
}
```